Aegis Micro NRC 2.0.1 Bedienungsanleitung Seite 28
- Seite / 42
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Users’ Guide: Networked Receiver Controller - NRC-2.0.1 PAGE 28
11
th
October 2005 Copyright © 2005 Aegis, Inc wwww.aegis-inc.net [ph. 240-568-9006]
expected from the receiver and it will be delivered back to the client. If
the box is checked but no response is generated by the receiver then the
receiver will briefly go offline while the NRC re-synchronizes
communication. If a receiver response is generated when the box is not
checked, the response is simply discarded. The “Response” box should not
be checked unless a response is required by the user.
Note: This interface should only be used by advance users who are
familiar with the impact of issuing commands directly to the receivers.
o Receiver Reset
The receiver reset button provides a receiver reset capability, although it is
important to note that the result of a reset can be different for different
receivers.
eg. Resetting the WJ-8723 receiver resets the receiver back to a known
configuration profile, while resetting the TenTec Rx331 refreshes the
receiver with its most recent user programmed settings.
o Receiver Reboot
The receiver reboot button allows a low level receiver reboot sequence to
be sent to the receiver where supported. It should be used when the
receiver has entered into some unknown state and is a last resort before a
power-off reset is tried.
The receiver reboot process also initiates a POST of the receiver and will
take about 15secs.
• Data capture
The bottom section of the content panel allows the user to capture audio data
samples from the receiver attached to this channel. Clicking the Capture button
will launch the Capture channel data dialog. While capturing, the Stop button
allows the user to stop data capture.
- NRC-2.0.1 1
- Proprietary Statement 2
- Disclaimer 2
- Warning 2
- Table of Contents 3
- General Information 5
- Channel Architecture 6
- Audio Data Capture 6
- Capabilities Summary 8
- Specifications 9
- Installation 11
- Hardware Installation 12
- NRC Configuration 13
- Step 6: Set the Host Name 17
- Step 7: Restart the NRC 17
- Operation 20
- Requirements 22
- Running the NRC Java Client 22
- Connect to NRC Server Dialog 22
- The Main Application Window 23
- Channel Nodes 23
- Content Panel 24
- Channel Node 26
- Toolbar 29
- Status Bar 30
- Change Receiver Model Dialog 31
- Change Antenna Model Dialog 32
- NRC Properties Dialog 33
- Destination 34
- Options 34
- Signal Display Dialog 35
- BAE Systems WJ-8723 37
- TEN-TEC RX-331 37
- NRC File System 38
- UPDATE Command 39
- RESTORE Command 39
- CLEAN Command 40
- Upgrade Procedure 40
Philips SoundBar Home Entertainment-System manuales
Manuales del propietario y guías del usuario para Audio Philips SoundBar Home Entertainment-System.
Ofrecemos 8 manuales en pdf Philips SoundBar Home Entertainment-System para descargar gratis por tipos de documentos: Manual de usuario
Kommentare zu diesen Handbüchern